DOSAGE

The optimum dosage of ABAFLOW iSC-305 can be determined by trials at the site. Depending on concrete mix design (sizes and types of aggregates, cement content, water/cement ratio, ambient temperature, and concreting conditions), a dosage of between 0.8 and 2.0 percent by weight of cement or cementitious material is recommended.

For use with other ranges of dosage, contact ABADGARAN GROUP Technical Services Department.

DIRECTIONS OF USE

1. ABAFLOW iSC-305 could be added to a part of the concrete mixing water, then added to the concrete mix.

2. ABAFLOW iSC-305 could be added to the concrete mix during the mixing cycle at the same time as the water or the aggregate, or it could be added to ready-mix concrete before placing concrete.

3. Admixtures must be weighed carefully.

FIELD OF APPLICATION

• Special concrete applications for 3D Concrete Printing and other advanced construction technologies
• Production of various structural concretes, including High Performance Concrete (HPC), High Strength Concrete (HSC) and low water-to-cement ratio concrete
• Ready-mix concrete, pumpable concrete and projects requiring extended transportation time and long slump retention
• Concrete placement in hot and dry weather conditions and mass concrete applications, aiming to improve moisture management, reduce shrinkage and limit the risk of early-age cracking
• Construction of various concrete elements, including foundations, columns, beams, slabs, walls, bridges, tunnels, tanks, hydraulic structures and marine structures
• Production of durable, low-permeability concrete suitable for aggressive environments and severe service conditions

Concrete containing supplementary cementitious materials (SCMs), low-carbon

• Multifunctional All-in-One technology, reducing the need for simultaneous use of multiple specialized admixtures.
• Utilization of selected bio-based components with a focus on reducing carbon footprint
• Internal moisture management of concrete through proprietary Internal Self-Curing (iSC) technology
• Effective reduction of water-to-cement ratio and improvement of early and ultimate concrete strength
• Improved cement hydration process, contributing to the formation of a denser, more uniform and durable concrete microstructure
• Reduced concrete permeability against water, chloride ions, sulfates and other aggressive environmental agents
• Improved concrete surface quality and reduction of surface defects
• Enhanced pump ability, placing and finishing properties while reducing wear on concrete handling and placement equipment
• High compatibility with various types of cement and other concrete admixtures
• Excellent slump retention and rheological stability
• Stable performance across a wide range of mix designs, construction conditions and cementitious systems
• Reduced concrete shrinkage, limitation of early-age cracking and improved microstructural stability
• Increased durability, construction efficiency and service life of concrete structures

STORAGE

Shelf life: 1 year in the original package

Storage condition: Should be protected from direct sunlight and frost. Keep the container in the temperature range between +10°C and +30°C.

PACKING

23 kg container

HEALTH & SAFETY

This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed and should not come into contact with the skin and eyes. In case of contact with the eyes, rinse immediately with plenty of water. ABAFLOW iSC-R is not flammable. For further information, refer to the material safety data sheet. MSDS is available at the ABADGARAN GROUP website.

TECHNICAL SERVICE

The ABADGARAN GROUP Technical Department is available to assist you in the correct use of our products, and its resources are at your disposal entirely without obligation.