ABAREPAIR-F

APPLICATION
1. Remove damaged concrete and prepare exposed steel reinforcement.
2. Thoroughly clean repair area using high pressure water jet to remove all loose debris and contamination.
3. Replace damaged concrete using ABAREPAIR-F, build up in layers if necessary. Apply ABAREPAIR-F with a trowel or spatula.
 Press hard by hand. Thicker repairs may be achieved by working in layers.

ADVANTAGES

• Excellent adhesion to most common substrates.
• Non shrinkage
• Excellent mechanical strength.
• High early strength.
• Provides maximum protection against freeze and thaw cycles.
• Waterproofing capability and impermeability.
• No destructive effect on the steel.
• Available in wide range of colors.
• Easy apply.
   

FIELD OF APPLICATION

• Repairing of cracks and porous surfaces.
• Provides smooth level surfaces.
• Underlayment for floors and walls before placement of new covering materials.
• Filling voids and holes.
• Can be used for surfaces that are in direct contact with water.
• Larger scale repairs where formwork cannot be erected.
• Can be applied up to 50 mm thick per application layer.
   

STORAGE

• Shelf life: 1 year in the original package.
• Storage condition: Should be protected from direct sunlight and moisture. Keep bag in the temperature range between +10°C and +30°C.
• Packing: 25 kg bag.

HEALTH AND SAFETY
This product does not contain any substances hazardous to human health and the environment.
However, it should not be swallowed and contact with skin and eyes. In case of contact with eyes,rinse immediately with plenty of water. 
Gloves & goggles should be worn when applying. For further information refer to the material safety data sheet.
ABAREPAIR-F is not flammable. MSDS is available at ABADGARAN website.