P.A.PLAST-201

DOSAGE
The optimum dosage of P .A. PLAST-201 can be determined by trials in the site. Depending on concrete mix design (sizes and types of aggregates,
 cement content, water/cement ratio,ambient temperature and concreting conditions), a dosage of between 0.5 and 1.5 percent by
weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN GROUP Technical Services Department.

DIRECTION OF USE
1- P. A. PLAST-201 could be added to a part of concrete mixing water then added to the concrete mix.
2- P. A. PLAST-201 could be added to the concrete mix during the mixing cycle at the same
time as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.
3- Admixtures must be weighed carefully.

APPLICATION

• Suitable for producing pumpable concrete.
• Ready mix concrete.
• Slabs, foundations, columns, shear and retaining walls, deck bridges, etc.
• Design of concrete mixes with crushed aggregates.
• Hot weather concreting.
   

ADVANTAGES

• Reduces water-cement ratio up to 12%
• Increases workability and workability retention of concrete.
• Improves pumpability of concrete.
• It can be used with all types of Portland cement.
• Prevents creep and shrinkage of concrete.
• Increases the compressive strength of concrete.
• Prevents bleeding and segregation of concrete.
   

STORAGE
Shelf life: 1 year in the original package.
Storage condition: Should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C.
Packing: 22 kg container or 1000 kg tank.

HEALTH AND SAFETY
This product does not contain any substances hazardous to human health and the environment.
However, it should not be swallowed and contact with skin and eyes.

In case of contact with eyes, rinse immediately with plenty of water. P. A. PLAST-201 is not flammable.
For further information refer to the material safety data sheet.

MSDS is available at ABADGARAN GROUP website.