Abadgaran | AQUAFORM-790

AQUAFORM-790, an environmentally friendly version of the company’s heritage release agent, is comprised of neutralized vegetable. It’s also solventless and non-toxic. Concepts of its art are established on last novel principles in production and developments of contemporary form release agents e.g. Green and most environment friendly composition to be made, provide long life and extensive reuse of frameworks, to remain hard, non-powdery, stain-free concrete surface with a minimum number of defects, permit clean release of formwork from the hardened concrete during stripping and Cost cuts in purchase and usage of them.

Method

DOSAGE
AQUAFORM-790 should be applied at the following stated coverage rates to obtain a thin and even film over the entire surface of the form or formwork:

Timber Formwork ~ 1 L per 10 – 15 m2
Metal Formwork ~ 1 L per 20 – 25 m2

SURFACE PREPARATION
Forms must be clean and free of any dust, dirt, laitance, hardened concrete or residue that might discolor new concrete.

APPLICATION
Apply AQUAFORM-790 with a brush, roller, or pressurized sprayer. Wipe off excess and drips with a clean, soft rag. Wait a minimum of 30 minutes before pouring Concrete.

New Wood Forms: Apply initial coat of AQUAFORM-790 at a rate of above recommended and do not wipe. Allow release agent to absorb into wood surface. For extremely porous forms a second saturation coat may be necessary prior to first use. Allow forms to dry, then recoat and wipe excess as stated above.

PACKAGING
20lit Gallons

Properties

ADVANTAGES

Low Volatile Organic Compound (V.O.C.) content.
High durability of the emulsion against temperature fluctuations and various thermal cycles.
Equally effective on all types of forming materials and form liners including elastomeric, PVC, and EPS
Allows for fast and easy stripping of formwork
Highly stable during placement and vibration of concrete
Does not stain or contaminate the finished concrete surface
Suitable for high detail forms and architectural concrete finishes
Increased corrosion resistance to steel surfaces
Extends the life of forms and inhibits oxidation of metal forms
Reduces labor cost of stripping and cleaning forms and equipment
Compatible with both type of static and slip-forming

Application

FIELD OF APPLICATION

Suitable for lubricating various types of molds including metal, wood, plastic, fiberglass, etc., for use in static and slip-forming concrete casting
Suitable for on-site and precast concrete applications
Suitable for exposed concrete and precast elements

Physical and Chemical Properties

TECHNICAL PROPERTIES

physical state	Visual inspection	Liquid
Color	Visual inspection	White
Solubility in Water	Visual inspection	Totally misible
Specific gravity	INSO 6454	0.95±0.05
Solid content	INSO 8117	16.5±1
pH	INSO 3178-18	6±1

Considerations

STORAGE & SHELFLIFE
Shelf life: 6 months in the original package
Storage condition: should be protected from direct sunlight and moisture. Keep Gallons in the temperature range between +10°C and +30°C.

Protection and Safty

HEALTH AND SAFETY
For information and advice on the safe handling, storage and disposal of chemical products, users shall refer to the most recent Material Safety Data Sheet (available on request) containing physical, ecological, toxicological and other safety-related data.

AQUAFORM-790 Data Sheet

رتبه بندي

نام

ايميل

عنوان نظر

AQUAFORM-790

Online Shopping Guide

QuickAccess