در حال بارگذاری...
MULTI-PURPOSE WATER REDUCER /HIGH RANGE WATER REDUCER BASED ON PCE
DESCRIPTION
P.A.PLAST-S4 is a water reducer / high range water reducer admixture.
It meets the requirements of the following standards:
ASTM C494/C494 M TYPE A, TYPE F
EN 934
ISIRI 2930
DOSAGE
The optimum dosage of P.A.PLAST-S4 can be determined by trials in the site.
Depending onconcrete mix design (sizes and types of aggregates, cement content, water/cement ratio,
ambient temperature and concreting conditions), a dosage of between 0.5 and 2.0 percent by weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN GROUP Technical Services
Department.
DIRECTION OF USE
1- P.A.PLAST-S4 could be added to a part of concrete mixing water then added to the concrete mix.
2- P.A.PLAST-S4 could be added to the concrete mix during the mixing cycle at the same time
as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.
3- Admixtures must be weighed carefully.
ADVANTAGES
APPLICATION
Specific gravity |
1.02±0.05 g/cm3 |
Physical state |
Liquid |
Color |
colorless to slightly yellow |
Chloride Content |
Nil to EN 934 |
STORAGE
HEALTH AND SAFETY
This product does not contain any substances hazardous to human health and the environment.However, it should not be swallowed and contact with skin and eyes.
In case of contact witheyes, rinse immediately with plenty of water.
P.A.PLAST-S4 is not flammable.
For further information refer to the material safety data sheet. MSDS is available at ABADGARAN GROUP website.