POWER PLAST–SM

DOSAGE
The optimum dosage of POWER PLAST-SM can be determined by trials in the site.
Depending on concrete mix design (sizes and types of aggregates, cement content,water/cement ratio, ambient temperature and concreting conditions), a dosage of between 0.4 and 0.8 percent by weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN Technical Services Department.

DIRECTION OF USE
1-POWER PLAST-SM could be added to a part of concrete mixing water then added to the concrete mix.
2- POWER PLAST-SM could be added to the concrete mix during the mixing cycle at the
same time as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.
3- Admixtures must be weighed carefully.

ADVANTAGES

• Reduces cement content in concrete.
• Very good Slump retention.
• Reduces water/cement ratio.
• Creating fluidity of concrete before setting (increased concrete workability).
• Prevents bleeding and segregation of concrete.
• Eliminates air content of concrete.
• Improves concrete consistency.
• Improves pumpability of concrete.
• It can be used with all types of Portland cement including Sulphate Resisting.
• Use simultaneously with silica fume, fly ash and other pozzolanic materials.
• Enables production and transportation of concrete over long distances.
• Increases the compressive strength of concrete.

APPLICATION

• Ready-mix concrete
• Mass concrete
• Produces concrete with fractured coarse aggregates
• Suitable for cast in place and pumpable concrete

STORAGE

• Shelf life: 1 year in the original package.
• Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C.
• Packing: 22 kg container or 1000 kg tank.