Please wait, loading...
Please wait, loading...
ABATAIKA-H1 is a fireproof coating based on Portland cement suitable for the oil, gas, and petrochemical industry. It is able to withstand high-intensity thermal shocks caused by hydrocarbon fire. ABATAIKA-H1 is highly durable coating and will not crack or spall when subject to mechanical impact. This coating has excellent physical, mechanical and chemical properties. It possesses high adhesion to the metal surfaces, final smooth surface and excellent abrasion resistance. ABATAIKA-H1 is asbestos free.
PREPARATION
Typical substrate (concrete and steel)
SUBSTRATE PREPARATION
The substrate must be clean, dry and free from visible moisture (including condensation),
concrete laitance, formwork release oils, loose millscale, loose rust and any other condition that
prevents good adhesion. Concrete curing agents should not be used.
Dosage
The recommended dosage per 1 square meter of the surface with a thickness of 1 centimeter is
7 kilograms.
• Reduces surface water evaporation in hot, dry, or windy conditions
• Prevents thermal shrinkage-induced cracking
• Lowers water-to-cement ratio
• Enhances concrete workability and flow
• Increases compressive, flexural, and tensile strengths
• Facilitates easier pumping and reduces wear on concreting equipment
• Promotes early-age strength development
• Compatible with all types of Portland cement
• Provides cost-effective mix designs for concrete exposed to impact, dynamic loading, and aggressive chemical attacks (e.g., sulfates and chlorides)
• Compensates for fine aggregate deficiencies and creates a more cohesive concrete matrix
• Improves concrete durability
• Enhances abrasion resistance
• Significantly reduces concrete permeability
UPDATING
Shelf life: 1 year in the original package
Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +5 °C and +40 °C.
This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed or allowed to be in contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water. For further information refer to the material safety data sheet.