در حال بارگذاری...
PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE)
REONET-SB1 is high range water-reducer and high-performance super plasticizer based on modified polycarboxylic (PC) polymers.
It meets the requirements of the following standards:
ASTM C1017/C1017 M, ASTM C494/C494 M TYPE F
EN 934
INSO 2930
DOSAGE
The optimum dosage of REONET-SB1 can be determined by trials in the site. Depending on concrete mix design (sizes and types of aggregates, cement content, water/cement ratio, ambient temperature and concreting conditions), a dosage of between 0.3 and 1.2 percent by weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN GROUP Technical Services Department.
DIRECTION OF USE
1-REONET-SB1 could be added to a part of concrete mixing water then added to the concrete mix.
2- REONET-SB1 could be added to the concrete mix during the mixing cycle at the same time as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.
3- Admixtures must be weighed carefully.
This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed or allowed to be in contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water. For further information refer to the material safety data sheet.
REONET-SB1 is not flammable. MSDS is available at ABADGARAN GROUP website.