Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.



PURE GEL is an optimized slurry with high pozzolanic activity which can improve hardened properties of concrete. 
Surprisingly it could eliminates the environmental risks of using silica fume (in powder form) and provides better dispersing quality.

It meets the requirements of the following standards:
BS EN 12390-8, BS 1881-122

The optimum dosage of PURE GEL can be determined by trials in the site. Depending on
concrete mix design (sizes and types of aggregates, cement content, water/cement ratio,ambient temperature and concreting conditions),
a dosage of between 6 and 10 percent by weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN Technical Services Department.

1-PURE GEL could be added to a part of concrete mixing water then added to the concrete mix.
2-PURE GEL could be added to the concrete mix during the mixing cycle at the same time
as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.
3-Admixtures must be weighed carefully.


  • Reduces cement content in concrete.
  • Improves pumpability of concrete and reduces depreciation of concreting equipment.
  • It can be used with all types of Portland cement.
  • Increases the compressive strength of concrete.
  • Considerably reduces permeability.
  • Increases the abrasion resistance of concrete.
  • Inhibits chloride ion penetration and any other destructive chemicals influence.
  • Increases durability of concrete.
  • Increases the electrical resistance of concrete.
  • Reduce the risk of cracks in concrete.


  • Reinforced and non-reinforced concrete.
  • Produces High Strength Concrete and Impermeable Concrete and Durable concrete.
  • Docks, deck bridges, channels, etc.
  • Designs of concrete mixes for Water and Wastewater Treatment.
  • Suitable for concrete construction at risk of explosion.
  • Production of high strength concrete to reduce the size of structures.

Physical state



 Dark gray

Specific gravity

1.34 ± 0.05 g/cm3

Chloride content

 Nil to EN 934


  • Shelf life: 1 year in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C.
  • Packing: 25 kg container.

This product does not contain any substances hazardous to human health and the
environment. However, it should not be swallowed or allowed to be in contact with skin and eyes. 
In case of contact with eyes, rinse immediately with plenty of water. 
For further information refer to the material safety data sheet.
PURE GEL is not flammable. MSDS is available at ABADGARAN website.