Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.



ANTIFREEZE-M is designed for producing cold weather mortar. The product combines
actions of fast setting and preventing from freezing simultaneously as it accelerates the
hardening of the mortar.

It does not contain chlorides and other compounds which could cause corrosion of reinforcement.


The optimum dosage of E. M. ANTIFREEZE-M can be determined by trials in the site.
Depending on ambient temperature a dosage of between 4.0 and 6.0 percent by weight of cement is recommended.
Note: Decrease the mixing water by the same weight as quantity as the E. M. ANTIFREEZEM .
For use with other range of dosage, contact ABADGARAN Technical Services Department.
Please contact our engineering office in case of simultaneously use of more than one admixture.

E. M. ANTIFREEZE-M can be added to concrete in two ways:
1-E. M. ANTIFREEZE-M could be added to ready-mixed mortars.
2-E. M. ANTIFREEZE-M could be added to a part or whole of mixing water.



  • Accelerates the progress of the thermal reaction of cement.
  • Accelerates the progress of the hydration reaction.
  • Accelerates the setting time of mortars.
  • Compatible with all types of Portland cement.
  • Chloride free.


  • Producing mortars in cold weather conditions.
  • Suitable for all mortars in which setting and stiffening time is important.

Physical state



 Opaque white

Specific gravity

 1.03 ±0.05 g/cm3

Chloride content

 Nil to EN 934

20 kg containers.


  • Shelf life: 12 months in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C.

This product does not contain any hazardous substance to human health and the environment.
However, it should not be swallowed and contacted with skin and eyes.
Rubber gloves, boots and goggles should be used during application. Accidental splashes on the skin should be washed with soap and water and any contaminated clothing removed.
Contact with eyes should be avoided and if any accidental contamination does occur they should be washed with copious amounts of water and medical attention sought.
ANTIFREEZE-M is not flammable.
For further information refer to the material safety data sheet.

MSDS is available at ABADGARAN website.