Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.



ABAGEL is a modified silica fume gel which improves the rheological properties of concrete.
 It is based on a highly pozzolanic materials that can significantly reduce water absorption and increases the compressive strength of concrete.
ABAGEL comprises the following chemicals:
1. Silica fume
2. Super plasticizer

This product can be evaluated using the following standards:
ASTM C1202,
BS EN 12390-8, BS 1881-122


The optimum dosage of ABAGEL can be determined by trials in the site. Depending on concrete
mix design (concrete type, workability, compressive strength, size and type of aggregates,cement content, water/cement ratio, ambient temperature and concreting conditions),
 a dosage of between 5.0 and 9.0 percent by weight of cement is recommended.
For using a dosage out of the above-mentioned range, contact ABADGARAN Technical Services Department.
Please contact Technical Services Department in case of simultaneously use of more than one admixture.

ABAGEL can be added to concrete in two ways:
1- ABAGEL could be added to ready-mix concrete before placing concrete.
2-ABAGEL could be added to whole or a part of mixing water then added to the concrete mix.



  • Good reduction in water:cement ratio.
  • Good Improvement in workability & pumpability of concrete.
  • Reduction in cement content of concrete.
  • Compatible with all types of Portland cement.
  • Increase compressive strength of concrete.
  • Eliminates water absorption.
  • Considerable reduction in concrete permeability.


  • High Strength Concrete (HSC).
  • Water Resistant Concrete (WRC).
  • Concrete in marine environments or exposed to chemical attacks.
  • Water and waste water treatment plants.
  • Piers, bridges, water tanks, etc.

Physical state


Specific gravity

 1.42 ± 0.05 g/cm3


 Dark gray

Chloride content

 No chloride content


  • Shelf life: 1 year in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep pail in the temperature range between +10°C and +30°C.
  • Packing: 25 kg pail.

This product does not contain any substances hazardous to human health and the environment.
However, it should not be swallowed and contact with skin and eyes.

In case of contact with eyes, rinse immediately with plenty of water.

ABAGEL is not flammable. For further information refer to the material safety data sheet.
MSDS is available at ABADGARAN website.