Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.
phone
instagram
telegram
aparat

ABACRYSTASEAL

CEMENT BASED CRYSTALLING WATERPROOFING SYSTEMS

DESCRIPTION

ABACRYSTASEAL is a unique chemical treatment, penetrating into the concrete with capillary effect, which waterproofs and protects concrete in depth.

SURFACE PREPARATION

The substrate should be clean and sound, free of dust, loose particles, grease, oil, primers from previous membrane systems or bitumen. The surfaces must also have an open capillary system for the ABACRYSTASEAL treatment. The substrate must be prepared by suitable mechanical preparation techniques such as high pressure water jetting, wet sandblasting, wire brushing etc. and properly pre-wetted to a saturated surface dry condition. Spalled concrete should be repaired by cutting out to sound concrete. Cracks, holes and honeycombs must be repaired and patched with ABACRYSTASEAL and silica sand (5:2 by weight) prior to application.

                     

MIXING

Mix one 25 kg bag with approximately 7.5 liters of clean water mechanically using a drill and paddle (max. 500 rpm). Do not mix too wet otherwise the mix may crack and spall when drying.

Always add powder to water. Mix until a homogeneous consistency is achieved. Do not rework stiff material by adding more water. Mix sufficient material to use within 30 minutes.

 

APPLICATION

Continuously mix the product during the application, do not dilute and use the hardened mixture. Product should be applied in two layers. Apply ABACRYSTASEAL with a stiff fiber brush. Scrub well into the damp wall filling all pores and finish with final strokes in one direction. Apply the second coat while the first coat is still green, if this is not possible pre-water before application of the second coat. Application should be done first to the wall and then to the floors.

 

CURING

Moisture cure ABACRYSTASEAL treated surfaces 3-4 times per day for a period of 2-3 days starting with fine water fog spraying the day following the completion of ABACRYSTASEAL applications and dehydration should be prevented.

ADVANTAGES

  • Penetrates deeply and seals concrete’s capillary tracts and shrinkage cracks.
  • Becomes an integral part of the concrete.
  • Completely effective against high hydrostatic pressure.
  • Protects from waterborne corrosive agents.
  • Protects concrete and steel rebar from deterioration.
  • Seals minor shrinkage and hairline cracks.
  • Allows the passage of water vapor from the inside of the structure (the concrete breathes).
  • Easy to apply.
  • Approved for use in contact with potable water.

FIELD OF APPLICATION

  • Construction joints.
  • Sewage and waste water treatment tanks.
  • Structures below the groundwater level and subject to water penetration.
  • Tunnels.
  • Foundations.
  • Concrete pipes.
  • Swimming pools.
  • Aquariums.
  • Manholes.
  • Elevator Pits.
     

Appearance

Grey powder

Chemical Resistance

Resists chemicals in pH range 3-11 (ASTM C-267-77)


 

STORAGE & SHELFLIFE

  • The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.
  • Packaging: 25 kgs PE Bag.

HEALTH & SAFETY

ABACRYSTASEAL is alkaline, use protective gloves. If gets into eyes clean out with water immediately, and contact a physician. Mix in small quantities. MSDS is available at ABADGARAN GROUP website.

WE DEVELOP CHEMISTRY