Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.

DASYNEP FC-20

DESCRIPTION
DASYNEP FC-20 is an aromatic tertiary amine based compound designed to be used in accelerating various curing epoxy and polyurethane systems such as Adhesives, Coatings, etc. The functionality of chemical system designed in DASYNEP FC-20 makes it as an effective accelerator for acid anhydride, polyamine, polyamide and polyamidoamine curing systems.

 

  • Fast cure polymerization catalyst in Polyamine/ Polyamide Curing Systems.
  • Catalyst for polyurethane coatings.
  • Effective accelerator for low temperature curing.
  • Appropriate for the systems when need to an Unchangeable Glass Transition values and mechanical performance through.
     
  •  Epoxy and polyurethane systems.
     

SPECIFICATIONS

Appearance

 

Brown

Amine value (mg KOH /g)   

ASTM D2074

~300-360

Viscosity (@25°C , mP.s)

ISO 3219

18000-22000

Density (@25°C , g/cm3)

 

~1.18

Non- volatile

 

100%

Recommended mixing ratio, phr

 

8~15

 

 

 

 

 

 

 

 

 

 

STARTING FORMULATION FOR PERFORMANCE COMPARISON

Formulation with DASYNEP FC-20

Formulation Without DASYNEP FC-20

 

100

100

EPON Resin 828

60

60

EPIKURE Curing Agent F205

10

-

DASYNEP FC-20

15min

45min

Gel time@ 25°C

 

PACKING

DASYNEP FC-20 is available in 200 kg drums.

 

STORAGE & SHELFLIFE

The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.

HEALTH & SAFETY

This product is Flammable. Keep away from heat and open flame. Keep container closed. Use with adequate ventilation. Avoid prolonged and repeated contact with skin. If used in confined areas, observe the following precautions to prevent hazards of fire or explosion or damage to the health:

1-Circulate adequate fresh air continuously during application and drying.

2-Use fresh air masks and explosion proof equipment.

3- Prohibit all flames, sparks, welding and smoking.

MSDS is available at ABADGARAN website.

 

 

WE DEVELOP CHEMISTRY