Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.

S.P.A.PLAST–A

IGH RANGE WATER REDUCER / SUPER PLASTICIZER AND ACCELERATING ADMIXTURE

DESCRIPTION
S.P.A.PLAST-A is high range water reducer and super plasticizing admixture with controlled acceleration.
It meets the requirements of the following standards:
ASTM C494/C494 M TYPE E, EN 934 and ISIRI 2930

DOSAGE
The optimum dosage of S.P.A.PLAST-A can be determined by trials in the site. Depending on concrete mix design (sizes and types of aggregates, cement content, water/cement ratio,ambient temperature and concreting conditions), a dosage of between 0.5 and 1.5 percent by weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN GROUP Technical Services Department.

Note: Please contact our engineering office in case of simultaneously use of more than one admixture.


DIRECTION OF USE
1- S.P.A.PLAST-A could be added to a part of concrete mixing water then added to the concrete mix.
2- S.P.A.PLAST-A could be added to the concrete mix during the mixing cycle at the same time as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.
3- Admixtures must be weighed carefully.

ADVANTAGES

  • Reduces water-cement ratio up to 20%.
  • Increases workability and workability retention of concrete.
  • Improves concrete consistency.
  • Considerably reduces permeability.
  • Increment of initial compressive strength of concrete.
  • Improves pumpability of concrete and reducing depreciation of concreting Equipments.
  • Prevents creep and shrinkage of concrete.

APPLICATION

  • Slabs, foundations, columns, shear and retaining walls, deck bridges, etc.
  • Enables production and transportation of concrete in cold weather conditions.
  • Pre-cast concrete.
  • Concrete placement using climbing system formworks.
     

 

 Specific gravity

  1.30+ 0.05 g/cm3

 Physical state

  Liquid

 Color

  Dark brown

 Chloride content

  Nil to EN 934

STORAGE

  • Shelf life: 1 year in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C.
  • Packing: 23 kg container or 1000 kg tank.
     

HEALTH AND SAFETY

  • This product does not contain any substances hazardous to human health and the environment.
  • However, it should not be swallowed and contact with skin and eyes.
  • In case of contact with eyes, rinse immediately with plenty of water. S.P.A.PLAST-A is not flammable. For further information refer to the material safety data sheet.


MSDS is available at ABADGARAN GROUP website.

WE DEVELOP CHEMISTRY