Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.



A ONE COMPONENT LIQUID, ACRYLIC ELASTOMERIC WATERPROOFING MEMBRANE ELASTOCOAT comprises a single component water based, high solids, acrylic copolymer waterproof membrane coating applied over a range of substrates. ELASTOCOAT is a crack accommodating coating containing additives to inhibit the growth of mould and resist bacterial growth.

The substrate should be clean and sound, free of dust, loose particles, grease, oil, primers from previous membrane systems or bitumen. Bitumen or primers should be removed by shot blasting or mechanical means. Spalled concrete should be repaired by cutting out to sound concrete and patching with E.M.SuperRepair .Cracks, holes and honeycombs must be repaired prior to application.

  • Safe to use, water based acrylic formulation
  • Easy water clean-up
  • One component - readily applied direct from pail
  • Excellent resistance to UV, weathering and CO2
  • Excellent build properties enable application to both horizontal and vertical surfaces. Lightweight no topping required.
  • Can be applied to a wide range of substrates.
  • Various colors available. Color fast.
  • Highly flexible - accommodates movement and minor cracking of substrates.
  • No solvents or fire hazard. No pungent smell.
  • Acoustic dampening properties.
  • Excellent long term durability.
  • Fast application.
  • High solids & resin content.
  • Remains flexible through use of high grade 100% elastomer acrylic polymers.
  • Low maintenance costs.
  • Reduced energy cost due to heat reflectivity.
  • Resistant to foot traffic.
  • Excellent dirt releasing ability.


Use as a decorative, waterproofing membrane to most types of building facades, walls, roofs and gutters. ELASTOCOAT has approval for use in wet areas such as bathrooms. It provides a protective waterproofing skin over polyurethane foam, protecting the PU foam from UV and weather attack. On roofs and balconies, ELASTOCOAT provides a durable, non-skid, waterproof finish which will accept regular foot traffic.

The application using brush or roller requires laying the material onto the surface, avoiding brushing out, to achieve the required film thickness per coat. A minimum of two coats are required on vertical surfaces to achieve a total dry film thickness of approximately 350 microns. On horizontal surfaces a minimum of three coats are required to achieve a total dry film thickness of approximately 500 microns.


  • Density : Approx. 1.4 g/cm3.
  • Drying tack free : Approx. 40 minutes at 23°C.
  • Recoat : 4 hours.
  • Fully dried : 7 days.
  • Application temp : 10-35 °C.
  • Adhesion to Concrete : > 2 MPa (Concrete failure) According to ASTM D 4541.
  • Hardness (Shore A) : 50-60.
  • Elongation : > 500%.
  • Accelerated weathering, 500 hours : No chalking or cracking  on the film.


20 kg plastic pails.

The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.

The Abadgaran International Technical Service Department is available to assist you in the correct use of our products and its resources are at your disposal entirely without obligation.



ELASTOCOAT is non-toxic but is alkaline in its nature. When applying gloves &goggles should be worn. Wash off splashes to skin with water. If in eyes wash out with plenty of clean water and seek medical attention. ELASTOCOAT is non-flammable. MSDS is available from Abadgaran.