Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.



MICRO GEL improves the rheological properties of concrete. It is based on a highly pozzolanic mineral material which significantly reduces water absorption and increases the compressive strength.

MICRO GEL comprises the following chemicals:

  1. Silica fume
  2. New generation super plasticizer

This advanced-technology product meets the requirements of the following standards:

ASTM C1202

BS EN 12390-8, BS 1881-122


The optimum dosage of MICRO GEL can be determined by trials in the site. Depending on concrete mix design (concrete type, workability, compressive strength, sizes and types of aggregates, cement content, water/cement ratio, ambient temperature and concreting conditions), a dosage of between 3.0 and 8.0 percent by weight of cement is recommended.

Note: when using MICRO GEL, water-cement ratio can be considered around 0.40.

For use with other range of dosage, contact ABADGARAN Technical Services Department.

Please contact our engineering office in case of simultaneously use of more than one admixture.



MICRO GEL can be added to concrete in two ways:

1- MICRO GEL could be added to ready-mix concrete before placing concrete.

2-MICRO GEL could be added to a part or whole of concrete mixing water then added to the concrete mix.


  • Reduces water-cement ratio.
  • Increases workability and workability retention of concrete.
  • Improves pumpability of concrete and reducing depreciation of concreting Equipments.
  • Reduces cement content in concrete.
  • It can be used with all types of Portland cement.
  • Increases the compressive strength of concrete about 10%-40%.
  • Significantly reduces water absorption.
  • Considerably reduces permeability.



  • Mass concrete.
  • Produces High Strength Concrete (HSC) and Water Resistant Concrete (WRC).
  • Suitable for marine environments or the regions exposed to chemicals attack.


Physical state


Specific gravity

 1.44+ 0.05 g/cm3



Chloride content

 Nil to EN 934


  • Shelf life: 1 year in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep pail in the temperature range between +10°C and +30°C.
  • Packing: 25 kg pail.


This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed and contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water. MICRO GEL is not flammable.  For further information refer to the material safety data sheet.

MSDS is available at ABADGARAN website.