Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.
phone
instagram
telegram
aparat

E.M.ANTIFREEZE-C

COLD WEATHER CONCRETE ADDITIVE
DESCRIPTION
E.M.ANTIFREEZE-C is designed for cold weather concreting. The product combines actions
of fast setting and preventing from freezing simultaneously as it accelerates the hardening of the concrete. 
It does not contain chlorides and other compounds which could cause corrosion of reinforcement.

DIRECTION OF USE


Take the following points into consideration when cold weather concreting:

  • Ensure that the surfaces are completely frost-free.
  • Remove all snow and ice from surface of forms.
  • Surface of moulds must be heated to warm up more than 5°C.
  • Keep the concrete temperature over than 6°C.
  • It’s better to mix E.M.ANTIFREEZE-C to water and added to dry mix.
  • If you have applied ready mix concrete, E.M.ANTIFREEZE-C should be mixed in truck.


mixer and it use after mixed.

  • During concreting, do not let any reduction in concrete temperature and it should not below +5°C, otherwise it causes to stand the cement hydration activity.
  • When the concrete temperature was less than 5°C, increase dosage of E.M.ANTIFREEZEC.

ADVANTAGES

  • Accelerate the progress of the thermal reaction of cement.
  • Accelerate the progress of the hydration reaction.
  • Accelerate the initial setting time.
  • Compatible with all types of Portland cement.
  • Increase initial and final compressive strength of concrete.
  • Chloride free.
     

APPLICATION

  • cold weather concreting.
  • Particularly suitable for concreting in the temperature range between +5 and -15°C.
  • Suitable for all general repairing application particularly in cold weather.
     

Physical state

 Liquid

Color

 clear

Specific gravity

 1.07 ±0.02 g/cm3

Chloride content

 Nil to EN 934

PACKAGING
20 kg containers.


STORAGE

  • Shelf life: 12 months in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +35°C.
     

HEALTH AND SAFETY
This product does not contain any hazardous substance to human health and the environment. However, it should not be swallowed and contacted with skin and eyes.
Rubber gloves, boots and goggles should be used during application. Accidental splashes on the skin should be washed with soap and water and any contaminated clothing removed.
Contact with eyes should be avoided and if any accidental contamination does occur they should be washed with copious amounts of water and medical attention sought.
ANTIFREEZE-C is not flammable.


For further information refer to the material safety data sheet. MSDS is available at ABADGARAN website.
 

WE DEVELOP CHEMISTRY