Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.

MOULD OIL-O400

DESCRIPTION
MOULD OIL-O400 is a solvent based mould release agent containing additional components
to enhance resistance to corrosion on steel surfaces. It is designed and formulated to function
as a bond breaker between formwork or moulds and freshly placed concrete. 
MOULD OILO400 will allow air to escape from the interface during concrete placing and vibration.

This release of air ensures high quality fair-faced and stain-free concrete.

APPLICATION INSTRUCTIONS
The optimum method of application is by conventional spray equipment. However, a brush or roller can also be used.
For better surface finish, any excess liquid remaining on the surface after application should
be mopped or wiped off. Allow 1 - 3 hours to dry before pouring concrete

ADVANTAGES

  • Allows for fast and easy striking of formwork.
  • Does not stain or contaminate the finished concrete surface.
  • Highly stable during placement and vibration of concrete.
  • Reduces blow hole formation.
  • Does not promote rusting of the formwork.
     

FIELD OF APPLICATION

  • Can be used on all types of formwork.
  • To facilitate form release of steam cured, precast and cast in place concrete.
     

Consistency

 Liquid

Colour

 Transparent yellow

Specific gravity (g/cm3)

 ~ 0.8

Solubility in water

Insoluble

PACKAGING
20 L containers.


STORAGE & SHELFLIFE
The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.
Store in a dry area between 5ºC and 40ºC.

 

HEALTH & SAFETY
This product is Flammable. Keep away from heat and open flame. Keep container closed. Use
with adequate ventilation. Avoid prolonged and repeated contact with skin. If used in confined
areas, observe the following precautions to prevent hazards of fire or explosion or damage to the health:

1-Circulate adequate fresh air continuously during application and drying.
2-Use fresh air masks and explosion proof equipment.
3- Prohibit all flames, sparks, welding and smoking.


For further information, refer to the material safety data sheet. MSDS is available at ABADGARAN website.
MSDS is available at ABADGARAN website.

WE DEVELOP CHEMISTRY