POWER GEL-iSC

DOSAGE

The optimum dosage of POWER GEL-iSC can be determined by trials in the site. Depending on concrete mix design (concrete type, workability, compressive strength, sizes and types of aggregates,  cement   content,   water/cement  ratio,   ambient   temperature  and   concreting conditions), a dosage of between 1.0 and 3.0 percent by weight of cement is recommended.

Any deviation from the recommended dosage must be approved by the Concrete Technology Experts at Abadgaran Construction Chemicals Co.

Note: If using multiple concrete additives simultaneously, please consult Abadgaran's Technical Department.

DIRECTION OF USE

POWER GEL-iSC can be added to concrete in two ways:

1- POWER GEL-iSC could be added to ready-mix concrete before placing concrete.

2- POWER GEL-iSC could be added to a part or whole of concrete mixing water then added to the concrete mix.

• Enables internal curing by storing and gradually releasing water required for cement hydration
• Reduces surface water evaporation in hot, dry, or windy conditions
• Prevents thermal shrinkage-induced cracking
• Lowers water-to-cement ratio
• Enhances concrete workability and flow
• Increases compressive, flexural, and tensile strengths
• Facilitates easier pumping and reduces wear on concreting equipment
• Promotes early-age strength development
• Compatible with all types of Portland cement
• Provides cost-effective mix designs for concrete exposed to impact, dynamic loading, and aggressive chemical attacks (e.g., sulfates and chlorides)
• Compensates for fine aggregate deficiencies and creates a more cohesive concrete matrix
• Improves concrete durability
• Enhances abrasion resistance
• Significantly reduces concrete permeability

• Concrete production and transportation in hot, cold, or windy climates
• Concrete for massive structures such as dams, water treatment plants, water channels, and bridges
• Production of durable and impermeable concrete in environments exposed to aggressive chemical ions, such as the northern and southern coastal regions or saline lands
• Suitable for both reinforced and unreinforced structural concrete

• Physical state: Slurry
• Specific gravity: 1.26+ 0.05 g/cm³
• Color: Grey

• Shelf life: 1 year in the original package
• Storage condition: should be protected from direct sunlight and frost. Keep pail in the temperature range between +10 °C and +30 °C.
• Packing: 24 kg pail

• Shelf life: 1 year in the original package
• Storage condition: should be protected from direct sunlight and frost. Keep pail in the temperature range between +10 °C and +30 °C.
• Packing: 24 kg pail