All surfaces must be thoroughly cleaned and free of all loose dirt, dust, grease, loose or flaking paint, and loose surface plaster. Efflorescence or mould on masonry or concrete surfaces must be treated. Flatten gloss surfaces by thoroughly sanding and wipe clean with a damp cloth, then apply primer, sealer or undercoat as required.
FIELD OF APPLICATION
New and maintenance work
Residential, Institutional and Commercial sites
Properly primed surfaces: plaster, drywall, fiber boards and masonry
Walls, ceilings, and trim where a highly washable matt finish is required
Stir contents thoroughly before and during use with a broad flat stirrer using an upward action. Apply using brushes, rollers or spray equipment. Some colors may require more than 2 coats to achieve full hiding
20 kg plastic pails.
STORAGE & SHELFLIFE
The shelf life is 12 months if unopened, stored free from frost, moisture and direct sunlight.
The Abadgaran International Technical Service Department is available to assist you in the correct use of our products and its resources are at your disposal entirely without obligation.
ELASTOPAINT is non-toxic but is alkaline in its nature. When applying gloves & goggles should be worn. Wash off splashes to skin with water. If in eyes wash out with plenty of clean water and seek medical attention. ELASTOPAINT is non-flammable. MSDS is available from Abadgaran.