SignUp | Sign In
Abadgaran Construction Chemicals
Reaserch and Development
Factory at a Glance
Organizational Structure
Code Of Ethics
Mission
Achivements
Opportunities
Representative Opportunities
Headquarter
Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

See On Map
Abadgaran Group Office
Factory
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

See On Map
Abadgaran Group Factory
Customer Satisfaction Feedback Form
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.
phone
instagram
telegram
aparat
Home
Product Groups
Concrete Admixtures
E.M.GROUT-500

E.M.GROUT-500

EXPANDER ADMIXTURE FOR CONCRETE / MORTAR
DESCRIPTION
E.M.GROUT-500 is an advanced concrete and mortar admixture. It provides a controlled
expansion when added to concrete or mortar. E.M.GROUT-500 is used where conjunction is required.

It meets the requirements of the following standards:
ASTM C827 / C827 M, ASTM C806, ASTM C940

DOSAGE
Depending on demand expansion considering the C3S and C3A in the cement and ambient
temperature, a dosage of between 0.2 and 0.8 percent by weight of cement for mortar and
between 1.0 and 3.0 percent by weight of cement for concrete is recommended.
For produce low expansion mortar, optimum dosage of E.M.GROUT-500 can be determined by trials in the site.


DIRECTION OF USE
E.M.GROUT-500 should be added to the concrete or mortar mixture (About 3 to 5 minutes is necessary to combine).
Ready-mix concrete or mortar should be applied at least 15 to 20 minutes after mixing.
Note: curing is necessary after placing concrete.

ADVANTAGES

  • Provides a controlled expansion.
  • Prevents shrinkage and cracking.
  • Eliminates bleeding.
  • Accelerates time to obtain initial and final strength.
  • It can be used with all types of Portland cement (exception type 5).
  • Increases the compressive strength of concrete and mortar.
  • The product is free from iron particles and hence any possibility of development of points and blotches of rust is eliminated.
     

APPLICATION

  • The mortar used in steel structures and heavy machinery.
  • Injections for dams and tunnels.
  • Repairing of concrete structures where any shrinkage of concrete or mortar is to be avoided.
     

Physical state

 Powder

Color

 Gray

Specific gravity

 0.62+ 0.05 g/cm3

Chloride content

 Nil

STORAGE
Shelf life: 1 year in the original package.
Storage condition: should be protected from direct sunlight. Keep pail in the temperature range between +10°C and +30°C.
Packing: 10 kg bag.
Note: Please contact our engineering office in case of simultaneously use of more than one admixture.
Use simultaneously E.M.GROUT-500 with pozzolanic materials and Portland cement type 5 has not achieved correct results.

HEALTH AND SAFETY
This product does not contain any substances hazardous to human health and the environment.
However, it should not be swallowed or allowed to contact with skin and eyes. 
In case of contact with eyes rinse immediately with plenty of water. For further information refer to the material safety data sheet.
E.M.GROUT-500 is not flammable. MSDS is available at ABADGARAN website.

 

POWER PLAST–RM
E.M.ANTIFREEZE-C
MERQUA
S.P.A.PLAST–R
POWER GEL
MICRO GEL
A.C.P-F
A.C.P
POWER PLAST–ES
E.M.GROUT-500
See More...

E.M.GROUT-500 Data Sheet


WE DEVELOP CHEMISTRY