POWER GEL-iSC is an advanced additive formulated using Nano-hydrophilic polymer technology embedded within a microsilica gel matrix. It is designed to enable intelligent Self-Curing (iSC) by absorbing and retaining free water within its porous structure, thereby supplying the moisture needed to sust...

MS-5-iSC is an advanced additive formulated using Nano-hydrophilic polymer technology embedded within a microsilica gel matrix. It is designed to enable intelligent Self-Curing (iSC) by absorbing and retaining free water within its porous structure, thereby supplying the moisture needed to sustain c...

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE) REONET-SB1 is high range water-reducer and high-performance super plasticizer based on modified polycarboxylic (PC) polymers. It meets the requirements of the following standards: ASTM C1017/C1017 M, ASTM C494/C494 M TYPE F EN 93...

POWDER ACCELERATING ADMIXTURE / QUICK-SETTING FOR SHOTCRETE ABAQUICK-P is a low rate powder alkaline accelerator of water-cement reaction developed forshotcrete with a very rapid setting time. It is formulated to be used both in wet-mix Shotcrete aswell as dry-mix shotcrete spray systems. Because...

LIQUID ACCELERATING ADMIXTURE / QUICK-SETTING FOR SHOTCRETE ABAQUICK-L is a non-alkaline accelerator of water-cement reaction. It can be used for wet mixshotcrete. It complies with the requirements of following standard: ASTM C1141 ......

SUPPLEMENTARY ADMIXTURE FOR CEMENT INJECTION SLURRY ABABUILD-1100 is an admixture based on synthetic polymers for injection cement slurry. It could effectively reduce water/cement ratio as well as modifying rheology of slurry and alsosignificantly reduce bleeding. It meets the requirements of t...

PURE GEL SILICA FUME GEL DESCRIPTION PURE GEL is an optimized slurry with high pozzolanic activity which can increase mechanical properties and durability factors in hardened concrete and make concrete impermeable. Surprisingly it could eliminates the environmental risks of using silica fu...

AMORPHOUS (NON-CRYSTALLINE) SILICON DIOXIDE (SIO2) E. M. MICROSILICA is a very fine, gray powder with highly active pozzolanic properties. E. M. MICROSILICA can be used in addition of cement or as replacement of a part of cementcontent. It has to be mentioned that E. M. MICROSILICA is composed ...

COLD WEATHER MORTAR ADDITIVE DESCRIPTION ANTIFREEZE-M is designed for producing cold weather mortar. The product combines actions of fast setting and preventing from freezing simultaneously as it accelerates the hardening of the mortar. It does not contain chlorides and other compounds which ...

SUPER PLASTICIZING / WATERPROOFING SLURRY WITH HIGHLY POZZOLANIC ACTIVITY FOR READY-MIXED CONCRETE DESCRIPTION PUMKRET is an advanced concrete admixture which improves the rheological properties of concrete and could be added to the concrete mixtures at the job site. It is used for designing h...

PC and PP Fiber Modified Silica Fume Gel MS-5-FP improves the rheological properties of concrete. It is based on a highly pozzolanic mineral admixture that reduces water absorption and increases the compressive strength and makes concrete impermeable. Workability retention is special properties ...

PC MODIFIED SILICA FUME GEL MS-5 improves the rheological properties of concrete. It is based on a highly pozzolanic mineral admixture that reduces water absorption and increases the compressive strength and makes concrete impermeable. Mid-range water reduction and workability retention are spec...

MODIFIED RETARDING SILICA FUME GEL MICRO GEL-R improves the rheological properties of concrete. It is based on a highly pozzolanic mineral material which significantly reduces water absorption and permeability of concrete, besides increasing workability and controlling retardation. MICRO GEL-R...

MODIFIED ACCELERATING SILICA FUME GEL MICRO GEL-A improves the rheological properties of concrete. It is based on a highly pozzolanic mineral material which significantly reduces water absorption and permeability of concrete, besides increasing workability and accelerating hydration. MICRO GEL...

MODIFIED SILICA FUME GEL DESCRIPTION ABAGEL is a modified silica fume gel which improves the rheological properties of concrete. It is based on a highly pozzolanic materials that can significantly reduce water absorption and increases the compressive strength of concrete and makes concrete i...

HIGH PERFORMANCE RETARDING SILICA FUME GEL DESCRIPTION A.C.P-R is an advanced concrete admixture used for designing high performance concrete and multipurpose concrete mixtures. A.C.P-R is based on a highly pozzolanic mineral material which significantly reduces water absorption and permeabi...

HIGH PERFORMANCE ACCELERATING SILICA FUME GEL DESCRIPTION A.C.P-A is an advanced concrete admixture used for designing high performance concrete and multipurpose concrete mixtures. A.C.P-A is based on a highly pozzolanic mineral material which significantly reduces water absorption and perme...

WATER REDUCER / PLASTICIZER ADMIXTURE DESCRIPTION POZZOCRETE is a water reducer and plasticizing admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE A EN 934 ISIRI 2930 ......

MULTI-PURPOSE WATER REDUCER /HIGH RANGE WATER REDUCER BASED ON PCE DESCRIPTION P.A.PLAST-S4 is a water reducer / high range water reducer admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE A, TYPE F EN 934 ISIRI 2930 ......

MULTI-PURPOSE WATER REDUCER /HIGH RANGE WATER REDUCER DESCRIPTION P.A.PLAST-L1 is a water reducer / high range water reducer admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE A, TYPE F EN 934 ISIRI 2930 ......

WATER REDUCER / PLASTICIZER ADMIXTURE DESCRIPTION P.A.PLAST-204 is a water reducer and plasticizing admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE A EN 934 ISIRI 2930 ......

WATER REDUCER / PLASTICIZER ADMIXTURE DESCRIPTION P. A. PLAST-203 is a water reducer and plasticizing admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE A EN 934 ISIRI 2930 ......

WATER REDUCER / PLASTICIZER ADMIXTURE DESCRIPTION P. A. PLAST-201 is a water reducer and plasticizing admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE A EN 934 ISIRI 2930 ......

HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE DESCRIPTION S.P.A.PLAST-M4 is a high range water-reducer and super plasticizing admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE F, EN 934, ISIRI 2930 ......

SET ACCELERATING/WATER REDUCING/SUPER PLASTICIZING ADMIXTURE DESCRIPTION S.P.A.PLAST-A is a special set accelerating/water reducing/super plasticizing admixture recommended for cold weather concreting. It meets the requirements of the following standards: ASTM C494/C494 M TYPE E, EN 934 ...

HIGH RANGE WATER REDUCER / SUPER PLASTICIZER AND RETARDING ADMIXTURE DESCRIPTION S.P.A.PLAST-404 is a high range water-reducer and super plasticizing admixture with controlledretardation. It meets the requirements of the following standards: ASTM C494/C494 M TYPE G, EN 934 and ISIRI 2930 .....

HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE DESCRIPTION S.P.A.PLAST-403 is a high range water-reducer and super plasticizing admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE F, EN 934, ISIRI 2930 ......

HIGH RANGE WATER REDUCER / SUPER PLASTICIZER AND RETARDING ADMIXTURE DSCRIPTION S.P.A.PLAST-401 is a high range water-reducer and super plasticizing admixture with controlledretardation. It meets the requirements of the following standards: ASTM C494/C494 M TYPE G, EN 934 and ISIRI 2930 ......

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE DESCRIPTION REONET is high range water-reducer and high-performance super plasticizer based onmodified polycarboxylic (PC) polymers. It meets the requirements of the following standards: ASTM C1017/C1017 M, ASTM C494/C494 M TYPE F EN 9...

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER DESCRIPTION POWER PLAST-R is a high range water reducing and super plasticizing admixture based on modified polycarboxylic (PC) polymers. It provides excellent slump retention. It meets the requirements of the following standards: ASTM C1017/C1017...

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE DESCRIPTION POWER PLAST-PM is high range water-reducer and super plasticizing admixture based on modified polycarboxylic (PC) polymers. It acts efficiently to give controlled workability about180 minutes. It meets the requirements of th...

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE DESCRIPTION ABAPLAST WRL-4623 is high range water-reducer and super plasticizing admixture based on modified polycarboxylic (PC) polymers. It acts efficiently to give controlled workabilityabout 90 minutes. It meets the requirements of ...

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE DESCRIPTION ABAPLAST WR-4610 is high range water-reducer and super plasticizing admixture based on modified polycarboxylic (PC) polymers. It acts efficiently to give controlled workabilityabout180 minutes. It meets the requirements of t...

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER DESCRIPTION ABAPLAST SRT-2912 is a high range water reducing and super plasticizing admixture basedon modified polycarboxylic (PC) polymers. It provides excellent workability retention. It meets the requirements of the following standards: AST...

DESCRIPTION ABAPLAST ES-520 is used in the production of high range water reducing and superplasticizing admixture based on modified polycarboxylates ether (PCE). It is ideal for high early strength applications. It meets the requirements for ASTM C494 Types A and F. ......

DESCRIPTION ABAQUICK-AFP is a non-alkaline accelerator of water-cement reaction. It can be used for dry mix shotcrete. It is controlled based on: ASTM C1141, ASTM C1398 ......

DESCRIPTION ABAPLAST WR-460 is used in the production of high range water reducing and superplasticizing admixture based on modified polycarboxylates ether (PCE). It has both good water reduction and excellent flow retention properties. It meets the requirements for ASTM C494 Types A and F. ......

DESCRIPTION ABATARD-P is a highly efficient set-retarding admixture with crystallized structure which temporarily stops the chemical action of hydration, delaying the initial set in direct proportion to the dosage used. It meets the requirements of the following standards: ASTM C494/C494 M TYP...

DESCRIPTION ABATARD-L is a highly efficient set-retarding admixture which temporarily stops the chemical action of hydration, delaying the initial set in direct proportion to the dosage used. It meets the requirements of the following standards: ASTM C494/C494 M TYPE B EN 934-2 ISIRI 2930 T...

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE DESCRIPTION POWER PLAST-SM is high range water-reducer and super plasticizing admixture based on modified polycarboxylic (PC) polymers. It acts efficiently to give controlled workability about90 minutes. It meets the requirements of...

AIR-ENTRAINING ADMIXTURE E.M.AIR is an air-entraining admixture for use in concrete and mortar. It is used to improve workability, cohesion, and durability of concrete and mortar by the ultra-stable air bubbles with appropriate size and spacing factor, uniformly distributed throughout the mixture...

SUPER PLASTICIZER / WATERPROOFING ADMIXTURE WITH HIGHLY POZZOLANIC MINERAL FOR READY-MIXED CONCRETE DESCRIPTION MEZUKRET is an advanced concrete admixture which improves the mechanical properties anddurability of ready-mixed concrete and could be added to the concrete mixtures at the job site. M...

DESCRIPTION ABAQUICK-AFL is a non-alkaline accelerator of water-cement reaction. It can be used for wet mix shotcrete. It is controlled based on: ASTM C1141, ASTM C1398 ......

DESCRIPTION ABAQUICK-AFP is a non-alkaline accelerator of water-cement reaction. It can be used for dry mix shotcrete. It is controlled based on: ASTM C1141, ASTM C1398 ......

EXPANDER ADMIXTURE FOR CONCRETE / MORTAR DESCRIPTION E.M.GROUT-500 is an advanced concrete and mortar admixture. It provides a controlled expansion when added to concrete or mortar. E.M.GROUT-500 is used where conjunction isrequired. It meets the requirements of the following standards: ASTM ...

DESCRIPTION POWER PLAST-ES is high range water-reducer and super plasticizing admixture based on modified polycarboxylic (PC) polymers. It acts efficiently to give controlled workability about 105 minutes. POWER PLAST-ES can develop the early compressive strength of concrete. It is controlled ...

HIGH PERFORMANCE SILICA FUME GEL DESCRIPTION A.C.P is an advanced concrete admixture used for designing high performance concrete and multipurpose concrete mixtures. A.C.P is based on a highly pozzolanic mineral material which significantly reduces absorption and permeability of concrete, bes...

HIGH PERFORMANCE FIBER-SILICA FUME GEL A.C.P-F is an advanced concrete admixture used for designing high performance concrete and multipurpose concrete mixtures. A.C.P-F is based on a highly pozzolanic mineral material which significantly reduces water absorption and permeability of concrete, In ...

MODIFIED SILICA FUME GEL MICRO GEL improves the rheological properties of concrete. It is based on a highly pozzolanic mineral material which significantly reduces water absorption and increases the compressive strength. MICRO GEL comprises the following chemicals: Silica fume New gene...

PC MODIFIED SILICA FUME GEL POWER GEL improves the rheological properties of concrete. It is based on a highly pozzolanic mineral material which significantly reduces water absorption and increases the compressive strengthand makes concrete impermeable. High range water reduction and workability ...

HIGH RANGE WATER REDUCER / SUPER PLASTICIZER AND RETARDING ADMIXTURE DESCRIPTION S.P.A.PLAST-R is high range water reducer and super plasticizing admixture with controlledretardation. It meets the requirements of the following standards: ASTM C494/C494 M TYPE G, EN 934 and ISIRI 2930. ......

HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE MERQUA is a high range water reducer and super plasticizing admixture. It meets the requirements of the following standards: ASTM C494/C494 M TYPE F, EN 934 and ISIRI 2930 ......

COLD WEATHER CONCRETE ADDITIVE DESCRIPTION E.M.ANTIFREEZE-C is designed for cold weather concreting. The product combines actions of fast setting and preventing from freezing simultaneously as it accelerates the hardening ofthe concrete. It does not contain chlorides and other compounds which co...

PC HIGH RANGE WATER REDUCER / SUPER PLASTICIZER ADMIXTURE DESCRIPTION POWER PLAST-RM is high range water-reducer and super plasticizing admixture based on modified polycarboxylic (PC) polymers. It acts efficiently to give controlled workability about150 minutes. It meets the requirements o...