Abadgaran | S.P.A.PLAST

SET ACCELERATING/WATER REDUCING/SUPER PLASTICIZING ADMIXTURE

DESCRIPTION

S.P.A.PLAST-A is a special set accelerating/water reducing/super plasticizing admixture recommended for cold weather concreting.

It meets the requirements of the following standards:

ASTM C494/C494 M TYPE E, EN 934 and INSO 2930

Method

DOSAGE
The optimum dosage of S.P.A.PLAST-A can be determined by trials in the site. Depending on concrete mix design (sizes and types of aggregates, cement content, water/cement ratio,ambient temperature and concreting conditions), a dosage of between 0.5 and 1.5 percent by weight of cement or cementitious material is recommended.
For use with other range of dosage, contact ABADGARAN GROUP Technical Services Department.

Note: Please contact our engineering office in case of simultaneously use of more than one admixture.

DIRECTION OF USE
1- S.P.A.PLAST-A could be added to a part of concrete mixing water then added to the concrete mix.
2- S.P.A.PLAST-A could be added to the concrete mix during the mixing cycle at the same time as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.
3- Admixtures must be weighed carefully.

Properties

ADVANTAGES

Reduces water-cement ratio up to 20%.
Increases workability and workability retention of concrete.
Improves concrete consistency.
Considerably reduces permeability.
Increment of initial compressive strength of concrete.
Improves pumpability of concrete and reducing depreciation of concreting Equipments.
Prevents creep and shrinkage of concrete.

Application

APPLICATION

Slabs, foundations, columns, shear and retaining walls, deck bridges, etc.
Enables production and transportation of concrete in cold weather conditions.
Pre-cast concrete.
Concrete placement using climbing system formworks.

Physical and Chemical Properties

Specific gravity	1.30+ 0.05 g/cm3
Physical state	Liquid
Color	Dark brown
Chloride content	Nil to EN 934

Considerations

STORAGE

Shelf life: 1 year in the original package.
Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C.
Packing: 23 kg container or 1000 kg tank.

Protection and Safty

HEALTH AND SAFETY

This product does not contain any substances hazardous to human health and the environment.
However, it should not be swallowed and contact with skin and eyes.
In case of contact with eyes, rinse immediately with plenty of water. S.P.A.PLAST-A is not flammable. For further information refer to the material safety data sheet.

MSDS is available at ABADGARAN GROUP website.

S.P.A.PLAST–A Data Sheet

رتبه بندی

نام

ایمیل

عنوان نظر

S.P.A.PLAST–A

Online Shopping Guide

QuickAccess