Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.

ABAHARD 2100L

LOW-VISCOSITY PHENALKAMINE CURING AGENT

DESCRIPTION

ABAHARD 2100L is a modified Phenalkamine based low viscosity epoxy curing agent. This curing agent is designed to cure broad band of epoxy resins especially at low temperatures, high humid conditions and even under water. It’s specially designed low viscosity characteristic makes it as an appropriate element to be used with broad band of either solvent free and solvent based epoxy resins. This curing agent is used in anti-corrosive applications especially in marine and industrial environment.

.Please refer to the product technical information sheet

  • Excellent adhesion to metal and concrete
  • low viscosity and free flowing property
  • Suitable pot-life at both ambient and low temperatures
  • Long pot life under water
  • Moisture & low temperature tolerant during cure
  • Good resistance to chemicals, salt water and superior corrosion resistance

  • Under-water epoxy coating and putty
  • Industrial maintenance, marine and pipe coatings
  • Pipe and tank linings

SPECIFICATION

Appearance

Visual

Reddish brown liquid

Color

ASTM D1544-04

17 G

Viscosity @ 25°C

ASTM D2196-05

1500-4000 cP

Pot life @ 25°C

-

~ 35 min

Non – volatile

-

100%

 
 

TYPICAL PROPERTIES

Amine value

DIN 16945

290-320 mg KOH/g

AHEW

-

120-130

Mixing ratio

with EPON 828

(EEW = 190 g/eq)

-

100:60

Glass transition temperature

DIN 11357

50 °C

 

 

Curing properties: Dry environment

Thin film set time @ 25°C

ASTM D5895

6 hrs

Full cure @ 25°C

ASTM D5895

1 week

Thin film set time @ 5°C

ASTM D5895

12 hrs

Full cure @ 5°C

ASTM D5895

2 weeks

 
 

Curing properties: Under water

Thin film set time @ 25°C

ASTM D5895

12 hrs

Full cure @ 25°C

ASTM D5895

2 weeks

 

 

PACKAGING

The material is packed & delivered in 200 kg drums.

 

STORAGE & SHELFLIFE

  • Shelf life: 12 months in unopened original package
  • Storage condition: should be protected from frost, direct sunlight and moisture. Keep containers in the temperature range between +10°C and +30°C.
  • Packing: 200 kg drums.

HEALTH & SAFETY

This product is Flammable. Keep away from heat and open flame .Keep container closed .Use with adequate ventilation. Avoid prolonged and repeated contact with skin. If used in confined areas, observe the following precautions to prevent hazards of fire or explosion or damage to the health:

1-Circulate adequate fresh air continuously during application and drying.

2-Use fresh air masks and explosion proof equipment.

3- Prohibit all flames, sparks, welding and smoking.

MSDS is available at ABADGARAN website.

WE DEVELOP CHEMISTRY