The optimum dosage of A.C.P-R can be determined by trials in the site. Depending on concrete mix design (concrete type, workability, compressive strength, sizes and types of aggregates, cement content, water/cement ratio, ambient temperature and concreting conditions), a dosage between 5.0 and 9.0 percent by cement weight is recommended.
Note: when using A.C.P-R, water-cement ratio must be considered around 0.40.
For using other ranges of dosage, contact ABADGARAN INTERNATIONAL GROUP Technical Services Department.
Please contact our engineering office in case of simultaneous use of more than one admixture.
DIRECTION OF USE
A.C.P-R can be added to concrete in two ways:
1-A.C.P-R could be added to ready-mix concrete before placing concrete.
2-A.C.P-R could be added to a part or whole of concrete mixing water then added to the concrete mix.
Physical state: Slurry
Specific gravity: 1.43+ 0.05 g/cm3
Chloride content: Nil to EN 934
Shelf life: 1 year in the original package
Storage condition: should be protected from direct sunlight and frost. Keep pail in the temperature range between +10°C and +30°C
Packing: 25 kg pail
This product does not contain any hazardous substance to human health and the environment. However, it should not be swallowed and contacted with skin and eyes. In case of contact with eyes, rinse with plenty of water immediately. A.C.P-R is not flammable.
For further information refer to the material safety data sheet.
MSDS is available at ABADGARAN website.