Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.
phone
instagram
telegram
aparat

ABABITUMER

DESCRIPTION

ABABITUMER comprises a single component protective and waterproof coating with excellent adhesion and elasticity to substrates.

Dilute ABABITUMER with water to form a layer of primer on the substrate. After drying the first layer (primer), apply ABABITUMER on the prepared surface by brush, roller or spray.

  • High adhesion to substrates.
  • After drying, leave a flexible and elastic layer on substrate.
  • No droop and sag after a run.
  • Excellent resistance to chlorine and sulfate ions.
  • No solvents or fire hazard.
  • Fast application.

 

  • Tanking and waterproofing structures: to provide an impervious waterproof membrane on concrete and brick.
  • Floors: to provide a sandwich membrane in new construction or a surface treatment.
  • Walls: for interior and exterior walls.

 

  • Physical state : liquid.
  • Color : Black.
  • Specific gravity : 0.9± 0.05 g/cm3.
  • pH : 9.0± 0.5.
  • Solubility : Soluble in water before drying.
  • Time of initial drying : 2-4 hours @ 25° C.
  • Time of final drying : 7 days.

 

  • Dosage.
  • Depending on the porosity of substrate, about 1 to 2 kg will be adequate to cover one square meter.
  • Storage.
  • Shelf life: 1 year in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep pail in the temperature range between +10 and +30° C.
  • Packing: 25 kg pail.
  • Technical Service.
  • The Abadgaran International Technical Service Department is available to assist you in the correct use of our products and its resources are at your disposal entirely without obligation.

 

This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed and allowed to be contact with skin and eyes. In the case of contact with eyes rinse immediately with plenty of water. When applying gloves &goggles should be worn. For further information refer to the material safety data sheet.

E.M.AIR is not flammable.

 

WE DEVELOP CHEMISTRY