SignUp | Sign In
Abadgaran Construction Chemicals
Reaserch and Development
Factory at a Glance
Organizational Structure
Code Of Ethics
Mission
Achivements
Opportunities
Representative Opportunities
Headquarter
Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

See On Map
Abadgaran Group Office
Factory
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

See On Map
Abadgaran Group Factory
Customer Satisfaction Feedback Form
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.
phone
instagram
telegram
aparat
Home
Product Groups
Concrete Admixtures
MICRO GEL

MICRO GEL

MODIFIED SILICA FUME GEL

MICRO GEL improves the rheological properties of concrete. It is based on a highly pozzolanic mineral material which significantly reduces water absorption and increases the compressive strength.

MICRO GEL comprises the following chemicals:

  1. Silica fume
  2. New generation super plasticizer

This advanced-technology product meets the requirements of the following standards:

ASTM C1202

BS EN 12390-8, BS 1881-122

DOSAGE

The optimum dosage of MICRO GEL can be determined by trials in the site. Depending on concrete mix design (concrete type, workability, compressive strength, sizes and types of aggregates, cement content, water/cement ratio, ambient temperature and concreting conditions), a dosage of between 3.0 and 8.0 percent by weight of cement is recommended.

Note: when using MICRO GEL, water-cement ratio can be considered around 0.40.

For use with other range of dosage, contact ABADGARAN Technical Services Department.

Please contact our engineering office in case of simultaneously use of more than one admixture.

 

DIRECTION OF USE

MICRO GEL can be added to concrete in two ways:

1- MICRO GEL could be added to ready-mix concrete before placing concrete.

2-MICRO GEL could be added to a part or whole of concrete mixing water then added to the concrete mix.

ADVANTAGES

  • Reduces water-cement ratio.
  • Increases workability and workability retention of concrete.
  • Improves pumpability of concrete and reducing depreciation of concreting Equipments.
  • Reduces cement content in concrete.
  • It can be used with all types of Portland cement.
  • Increases the compressive strength of concrete about 10%-40%.
  • Significantly reduces water absorption.
  • Considerably reduces permeability.

 

APPLICATION

  • Mass concrete.
  • Produces High Strength Concrete (HSC) and Water Resistant Concrete (WRC).
  • Suitable for marine environments or the regions exposed to chemicals attack.

 

Physical state

 Slurry

Specific gravity

 1.44+ 0.05 g/cm3

Color

 Gray

Chloride content

 Nil to EN 934

STORAGE

  • Shelf life: 1 year in the original package.
  • Storage condition: should be protected from direct sunlight and frost. Keep pail in the temperature range between +10°C and +30°C.
  • Packing: 25 kg pail.

HEALTH AND SAFETY

This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed and contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water. MICRO GEL is not flammable.  For further information refer to the material safety data sheet.

MSDS is available at ABADGARAN website.

POWER PLAST–RM
E.M.ANTIFREEZE-C
MERQUA
S.P.A.PLAST–R
POWER GEL
MICRO GEL
A.C.P-F
A.C.P
POWER PLAST–ES
E.M.GROUT-500
See More...

MICRO GEL Data Sheet


WE DEVELOP CHEMISTRY