Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info@abadgarangroup.com

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.

P.A.PLAST-203

WATER REDUCER / PLASTICIZER ADMIXTURE

P.A.PLAST-203 is a water reducer and plasticizing admixture.

It meets the requirements of the following standards:

ASTM C494/C494 M TYPE A

EN 934

ISIRI 2930

DOSAGE

The optimum dosage of P.A.PLAST-203 can be determined by trials in the site. Depending on concrete mix design (sizes and types of aggregates, cement content, water/cement ratio, ambient temperature and concreting conditions), a dosage of between 0.5 and 1.5 percent by weight of cement or cementitious material is recommended.

For use with other range of dosage, contact ABADGARAN GROUP Technical Services Department.

 

DIRECTION OF USE

1- P.A.PLAST-203 could be added to a part of concrete mixing water then added to the concrete mix.

2- P.A.PLAST-203 could be added to the concrete mix during the mixing cycle at the same time as the water or the aggregate or it could be added to ready-mix concrete before placing concrete.

3- Admixtures must be weighed carefully. 

  • Reduces water-cement ratio up to 12%
  • Increases workability and workability retention of concrete
  • Improves pumpability of concrete
  • It can be used with all types of Portland cement
  • Prevents creep and shrinkage of concrete
  • Increases the compressive strength of concrete
  • Prevents bleeding and segregation of concrete
  • Enables production and transportation of concrete in normal weather conditions
  • Ready mix concrete
  • Suitable for producing pumpable concrete
  • Slabs, foundations, columns, shear and retaining walls, deck bridges, etc.

Specific gravity: 1.08±0.05 g/cm3

Physical state: Liquid

Color: Dark brown

Chloride Content: Nil to EN 934-2

Shelf life: 1 year in the original package

Storage condition: Should be protected from direct sunlight and frost. Keep container in the temperature range between +10°C and +30°C.

Packing: 22 kg container or 1000 kg tank

This product does not contain any substances hazardous to human health and the environment. However, it should not be swallowed and contact with skin and eyes. In case of contact with eyes, rinse immediately with plenty of water. P.A.PLAST-203 is not flammable. For further information refer to the material safety data sheet. MSDS is available at ABADGARAN GROUP website.

Expect Something Extra