Address No. 65, Shahid Ghandi St., North Sohrevardi Ave., Tehran, Iran

Phone +98 21 87754

E-Mail Address info[At]

Abadgaran Group Office
Address End of West 6th St., Safadasht Industrial Zone, Safadasht, Malard Road, Karaj, Iran

Phone +98 21 65741911-5

Abadgaran Group Factory
Thank you for giving us the opportunity to serve you better. Please help us by taking a few minutes to tell us about the service that you have received so far.



ABA CURE is a water-based curing compound which when applied to new concrete substrates after the final finishing operations are completed to form a film that retains mix water allowing normal hydration. This film remains as a protective surface sealing treatment that greatly reduces dusting and increases stain resistance of the cured concrete. ABA CURE meets the requirements of the following standards: ASTM C309, ASTM C156 BS 7542

Application should be made immediately following the final finishing operations as soon as the surface &ldquo sheen&rdquo of moisture has disappeared and slab can support the weight of an applicator. In case of delay, thoroughly dampen the surface with clean water then applying ABA CURE 2- Ensure that there is no free water on the surface before applying 3- In case of hot weather and Mat concreting, the required thickness is achieved by applying 2 layers. Leave the first layer for 30-60 minutes before applying the second layer 4- ABA CURE could be mixed with clean water (mixing ratio: ABA CURE:Water = 1:0.3-0.5 / wt) in temperate weathers 5- Apply by spray, brush, long nap roller, or lamb's wool applicator. For best results, we recommend a low-pressure garden-type sprayer with neoprene hoses. Apply uniformly to form a continuous film. 6- Apply ABA CURE at a rate of 150-200 grams per 1.0 m2 7- Avoid any ponding on the concrete surface Note: -Prior to drying equipment can be cleaned with soap and water -After applying, Protects surfaces from freezing

  • Forming a durable film
  • Reduces early evaporation
  • Aids concrete to attain maximum hydration, strength, durability and surface hardness
  • Shrinkage with associated hairline cracking and crazing greatly reduced in vertical and horizontal applications
  • Reduces permeability
  • Excellent moisture retention produces a durable concrete surface through optimum curing
  • Increases stain resistance and cleanability by sealing the surface pores
  • Extremely economical and easily applied




  • For application on vertical, horizontal, smooth or textured, concrete substrates
  • Concreting in windy areas
  • Concreting in areas where concrete is exposed to intense sunlight
  • Suitable for curing and sealing plain concrete and concrete surfaces treated with non-metallic, dry shake floor hardeners and topping courses
  • Suitable for interior or exterior concrete floors, pavements, sidewalks and structures
  • Applications where solvent-based products cannot be used because of health and safety reasons
  • Applications to existing concrete surfaces as economical, water clear, protective sealing treatments




  • Physical state: Liquid.
  • Specific gravity: 1.4± 0.1 g/cm3.
  • Color: Light gray (Silver).
  • pH: 12.0± 1.0
  • Chloride content: Nil.




30 kg containers
Shelf life: 1 year in the original package
Storage condition: should be protected from direct sunlight and frost. Keep container in the temperature range between +10° C and +30° C
The ABADGARAN INTERNATIONAL GROUP Technical Department is available to assist you in the correct use of our products and its resources are at your disposal entirely without obligation.




  • This product does not contain any hazardous substance to human health and the environment. However, it should not be swallowed and contacted with skin and eyes.
  • Rubber gloves, boots and goggles should be used during application. Accidental splashes on the skin should be washed with soap and water and any contaminated clothing removed. Contact with eyes should be avoided and if any accidental contamination does occur they should be washed with copious amounts of water and medical attention sought.
  • ABA CURE is not flammable.
  • For further information refer to the material safety data sheet. MSDS is available at ABADGARAN website.




Expect Something Extra